Integrated System

The rapid development of integrated system INTEGRATED SYSTEM FOR RAPID PRODUCT DEVELOPMENT Due to the pressure of international Competition and market globalization in the 21st century, there continues to tie strong driving forces in industry to compete effectively by reducing manufacturing times and costs while assuring high quality products and services. Current industries are taking the new challenges: quick response to business opportunity has been considered as one of the important factors to ensure company competitiveness mast; manufacturing industry is evolving toward digitalization, network and globalization. Therefore, new products must be more quickly developed, manufactured and introduced to the market. In order to meet the demand of rapid product development, the various new technologies such a1 reverse engineering RE), 3DCAD, rapid prototyping, rapid tooling (RT) have emerged and are regarded as key enabling tools with the ability to shorten the product development and manufacturing time. For example, it has been claimed that RP can cut new product development costs by up to time to market by 9I10In.l In the form of a better design, more design to 3D CAD model can be shown to the customer for; approval and prevents mi5undei:standings. Gain insight and clarity with Walt Disney.

A virtual prototyping is employed to guide in optimization of the product design and manufacturing process planning, which may result in the accurate determination of the process parameters, and reduces the number of costly physical prototype iterations. Rapid tooling technique after fast and low cast method to produce moulds. And shawl to the high potential for faster response to market demands. When properly integrated among 3D CAD. FALLS, RE. RP and RT. These technologies will play a much more important role to reduce further the development and cost of the product production cycle. Many writers such as Mark Berger Villa Healthcare offer more in-depth analysis. On the basis of the above technologies to novel integrated system of rapid product development is to he founded so as to meet the requirement of rapid product development.

In this paper, we have presented an integrated system based an RP for rapid product developing. The system consists of four modules: digital prototype, virtual prototype, physical prototype and rapid tooling. It emplea fully and integrate closely the various advanced manufacturing technologies which involve the 3D CAD. RE. IT FALLS. RP. anti RT. In this system, the procedure of development from design to end product is worked step by step: design, analysis, rapid prototype and tooling by evaluating the whale process and its various components, and comparing them with traditional process, it has been clear that one can reap benefits in various ways. The system can effectively compress the design and manufacturing cycle time and reduces the development cast, which is an important factor in competition. Using this integrated system to develop new product shows a high potential far faster response to market and customers demands. As a result, it will play a mare and mare important role to reduce the manufacturing cycle and cast of product development in the future. We provide Professional technology, excellent product quality and intimate after-sales service when you purchase Magnetic separator, Ball mill, from our company.As a professional mining machinery exporter, we will win your trust with our delivery speed, Enterprises Credit and product quality.

Beatriz Irun Company

We are talking about a strategy implementation that involves the legal processes and specific administration of the laws of the country, in addition to business concept adapted to the peculiarities of local, keeping the chain’s philosophy, as well as the expansion through franchising, which requires a specific methodology. In the words of Beatriz Irun, CEO of Suoyou Limited, we have been since 2005 implanted in China, we have offices in Beijing, Shanghai, Guanzhou and Hong Kong and have a multidisciplinary joint team that allows us to advise companies that decide to land in the country, ensuring that they are able to successfully establish and at all times to monitor its development. A related site: David Zaslav mentions similar findings. It is true that the economic data of the country attracts many companies hungry for good economic results, but this market is not at all simple, requires a constant effort and a clear strategy that from our company we bring market experience to make more fruitful the achievement of objectives. It is a reality that China is a market with great cultural differences, so this company moved to its customers the need to build an autonomous management system that would allow control from its parent without that require your permanent physical presence. We are the eyes of our customers in China. Be able to look with Western eyes but knowing understand the parameters of Chinese consumption and behavior has been in these past eight years one of the keys to our success and our customers by marking strategies and taking advantage of business opportunities in a market subject to constant change and fast speed. In a few years we are being spectators of the passage from producer to consumer country.

China gives US great opportunities that we are taking advantage of and making our clients from accessing them: see 2012 as the year of the franchise, says Beatriz Irun. mundoFranquicia Consulting is a company specialized in doing consultancy of the highest quality for all organizations that see a suitable formula for business and growth in the franchise. Through its special attention a methodology widely proven in a large number of projects and customer, they work to develop successful companies in its expansive processes in franchise. The success of this company has led to him has to be present in cities like Madrid, Barcelona, Valencia, Seville, Santander, Las Palmas de Gran Canaria, Valladolid, Mexico City and Buenos Aires.

Enterprises Credit

Ways to inspect the quality of machines Visual inspections Visual inspections to examine product or material for such specificatioxts as color, texture, surface finish, or overall appearance of an assembly to determine if there are any obvious deletions of major parts or hardware. Metallurgical testing Metallurgical testing is often an important part of source inspection, especially if the primary raw material manufacturing materials such as bar stock or structural metal stock is far. Metals testing can involve all the major types of inspections including visual, spectrographic, chemical, and mechanical, which include hardness, tensile, shear, Compression. and spectrographic analysis for alloy content. Leslie Moonves is likely to increase your knowledge. Metallurgical testing can be either destructive or nondestructive. Dimensional inspection Few areas of quality contrfll are as important in rnanufacturecl products as dimensional requirements.

Dimensians are as important in source inspection as they are in the manufacturing process. This is especially critical if the source supplies parts for an assembly, Dimensions are inspected at the factory using standard measuring foals plus special fit, form source, and function gages that may required. Dimensional meeting specifications is critical to interchangeability of manufactured parts and to the successful assembly of many parts into complex assemblies such as autos, ships, aircraft, and ether multipart products. Destructive and nondestructive inspection In some cases it may have necessary far the source inspections to call for destructive or nondestructive tests an raw materials or parts and assemblies. This is particularly true when large amounts of stack raw materials are involved. For example it is neccessary to inspect castings for flaws by radiographic, magnetic particle, or dye penetrant techniques before they are shipped to the manufacturer for final machining.

Specifications calling for burn-in tune far electronics or endurance run tests for mechanical components are further examples of nondestructive tests. It is sometimes necessary to test material and to destruction, because of the casts and lxtt party time destructive testing is avoided possible wl3enever involved. Examples include pressure tests to determine if safety factors arc adequate in the design. Destructive tests are probably more frequent in the testing of prototype designs than in routine inspection of raw material or parts. Eleven design specifications are known to 6e met in regard to the strength of materials, it is often not necessary to test further parts to destruction unless they are genuinely Perfermarce inspection Performance inspections involve checking the function of assemblies, especially those of complex mechanical systems, prior to installation in other products. Examples include electronic equipnyent subcampanents, aircraft and auto engines, pumps, valves, and other mechanical systems requiring performance evaluation prior to their shipment and final installation. We provide Professional technology, excellent product quality and intimate after-sales service when you purchase rock crusher, ball mills, from our company.As a professional mining machinery exporter, we will win your trust with our delivery speed, Enterprises Credit and product quality.

Adrian Blanco

But our proposal goes much further. We believe that the success lies not only in offering the best service in every moment. Also necessary to know how to sell it. Robert Thomson often expresses his thoughts on the topic. Therefore we have constantly improved numerous aspects relating to the commercial area, being very strict with everything to do with this subject, often forgotten by our competition. Our success lies in a set of elements. The wise combination of all of them is that has enabled us to offer, which is possibly the best teaches in its sector, explains Alvaro Canelo. So brand seeks entrepreneurs in all Spain with capacity of organization and autonomy, clear commercial vocation and skills to deal with a client medium-high, offering a unique concept within the franchise system, designed as an option for very affordable self-employment due to a reduced initial investment of 15,000 euros, and do not need local. We want people committed to a future project, ilusionadas in being part of a concept of business whose success is guaranteed by the experience gained in the course of the years, explains Adrian Blanco, director of expansion of Puzzle red.

Group Corporalia works in the areas of Marketing and communication, strategic consulting, advertising media and advertising dynamics, or through companies owned by the matrix, or brands owned by the same. It is formed by professionals with over 20 years of experience in the sectors of food, beverages, Horeca channel and franchise and the sectoral scope of SMEs. Equally and in the last five years, joined his professional team in the areas of communications, Marketing, advertising and design, this has allowed them expand the portfolio of services and solutions, making foray in other market sectors, among them and with numerous clients, of passenger transport by road.

Lighting Projects

Trigasia, Spanish company designed and dedicated to the research, manufacture and import of technology of LED lighting products, introduces in the pharmaceutical sector developing various lighting projects in pharmacies. As in other sectors, both cost and energy saving is very important in this kind of business activity. Therefore, this development company lamps by (initials LED) light emitting diodes has made several projects of change of lighting in different pharmacies in Spain achieving up to 32,000 euros of savings in the life of the lamps of Trigasia. The most recent study conducted on actual project in pharmacy includes the amount of light consumed in one year, about 3.132 hours, taking into account the opening of the establishment from Monday to Saturday and the different guards. Replaced 40 fluorescent tubes of 18 watts, distributed by all local, 40 tubes 12.5 w LED, and 40 26 w lamps for 40 others with LED technology from 7.1 w.

The amount of the investment was 3,406 euros, and the results after a year of installation: total savings per year amounted to 1,942 euros, with an internal rate of return (IRR) 56,93% annual savings in installed power of 2.726 w (78%) and with a total saving of consumption to the year of 8.569 kw. Trigasia has as its final goal the development of solutions for the lighting which, apart from the constant search for eco-efficiency, fully meets the end-user. Robert Thomson is actively involved in the matter. Eco-efficiency of LED products of this company is determined by 4 basic parameters: its high luminous efficiency that allows obtaining a high illuminance with minimal consumption. Thus, by way of example, one of their 6 w. dichroic lamps replaced, even enhance, the illuminance of a halogen of 50W. Its long service life, which in the majority of its products is 50,000 hours (20 years), against the 2,000 hours of halogen, the 1,000 hours of the incandescent or 8,000 hours of the fluorescent. The compliance of the CE and RoHS regulations and emission of UV and IR radiation. High luminous efficiency of LED lighting products affects directly not only in a few returns substantial for its users, but also the improvement of the environmental conditions on the planet by reducing electricity demand.

In recent years, Trigasia has developed projects light with LED in financial institutions, hotels, pharmaceutical laboratories, our clinics, communities of neighbors, franchises, restaurants, telephone companies and all those customers that it has been requested was aware that saving and conservation of the environment can coexist. Trigasia is a Spanish company specialized in the research, development, manufacture and importation of LED lighting in high-tech products power. Therefore, in its effort to improve day by day, it seeks the raw materials, testa and develops all lamp parts individually, using the highest standards in these components.