Forming Equipment Production

Range of equipment for the production of galvanized steel profiles for the frame construction is a mini-factory to produce a series of profiles for frame construction and for construction and reconstruction of the loft. Mini production for the manufacture of profiles includes: line slitting coiled metal, automatic production line for hat profile height of 25 mm and 45 mm, performing role of the sheathing; automatic line for production of C and P (C, U) shaped profiles (rack and rails), as well as thermo. Dana Gibber is open to suggestions. Forming equipment is optimal, cost effective and modern instrument for creation of galvanized profiles. Technology of light steel thin (LSTC) is combined with any conventional technology, by adding them to their advantages: high rates of construction, low operational cost, free planning, environmental friendliness, completeness of delivery to an object, the geometric accuracy of designs and a variety of external finishes. Building structures based on thin-walled galvanized profiles allow you to apply shallow foundations and make reconstruction of the roof of the old buildings without increasing substructure due to its low weight to improve performance Forming equipment fitted with the device 'Flying rub''The device is designed for cutting steel building and reinforcing and ensures non-stop operation of lines rolling profiles data types. 'Flying usd 'provides the roll forming mill for the rolling speed of 50 m / min. The maximum force on the knife 30 kN. In addition to standard profiles developed force can cut any public profile thickness of 1,5-2,0 mm, width strip 200-250 mm. Cutting narrow construction of profiles is advisable to use the device 'Flying rub' with a single cylinder, thus increasing the rolling speed of up to 70 m / min. The device is designed to cut construction profiles up to 100 mm in height and 50 mm and a thickness of 1 mm, which ensures non-stop work profile-bending lines for the production of building and reinforcing to the rolling speed of up to 70 m / min, significantly increases productivity.

Manufacturing Equipment

Forming equipment manufactured by our company – it faltseprokatnye machines for work on construction sites, machines for the production of ventilation, roof slopes, beak, etc. Used to our advantage plant manufacturing technology provides a full cycle: from the purchase of materials and components to the installation of electrical and painting the finished product. Faltseprokatnye machines oao mmz 3 is primarily reliability and high quality of products, blanks. Discovery Communications might disagree with that approach. Machines are equipped with additional rollers for rolling of different profiles. The equipment produced by our company is simple to service, flexibility and mobility. Raw material for faltseprokatnogo machine can serve as either sheet metal or rolled metal made of galvanized steel, polymer-coated steel, copper and aluminum. – faltseprokatny machine is a mobile construction and industrial equipment mainly intended for the manufacture of straight sections duct and ventilation systems can also be used in construction technologies – roofing, slopes, low tides, lighthouses, etc.

Thus, getting our Forming Equipment – faltseprokatny machine you get not just construction equipment and modern technology production seam ventilation and supplies of building materials. And as you know for success in any business is very important productivity and, therefore, due to the fact that the sheet metal is rolled through profiling Rollers, Socket with locking can be done easily double the ideal geometry (which is a manual method is very problematic), as well seam connection with a mechanized method of production has several advantages: compliance with the dimensions, radii, unlimited length, etc. However, please be aware that Forming Equipment (faltseprokatny machine) to work with folded compounds developed by our company with the required specifications to satisfy the peculiarities of Russian consumers. In connection with this machine has enhanced faltseprokatny (foldable) frame, a reliable point of attachment (adjustable legs), eyebolts for ease of movement, easy to use and at the same time is protected from unauthorized access. For works on our equipment does not require specialized training, enough to pass a short Course unit roll forming machine and work on it.